Dekama
DEKEMA AUSTROMAT™ Sintering Furnace 674
AUSTROMAT 674
The SiC-heating concept for every kind of milled dental prosthesis sintered
under atmosphere for as many as approximately forty parts per level.
Three heating elements realize a homogeneous temperature distribution up to as high as 1.530 °C. Remote control and quality management
are optionally integrated and provide a reliable partner of your milling or
grinding machine.
FURNACE FOR SINTERING COPINGS
UP TO 100 MM IN DIAMETER
The AUSTROMAT 674 is equipped with three silicon carbide heating elements, perfectly fitting
for sintering at temperatures up to 1.530 °C. These heating elements feature robustness and
durability and won't discolor copings.
The firing chamber is closed through the vibration free lift system. The AUSTROMAT 674 also
uses our unique, well-established system, to realize safely shortest sintering durations with
highest heating and cooling rates. This so-called AutoDry system controls temperature gradients through lift movement, dependent on chamber temperature. On each sintering level
approximately forty sintering units can be placed. Equip the furnace with two levels to reach
highest throughput. Diameters of sintering goods may reach up to 100mm.
Sintering programs are already factory preset, loaded through a thumb drive or optionally
downloaded from the huge DEKEMA sintering program internet data base. Optionally these
cycles might even be programmed by one click QR scanning. The furnace is operated through
its large 7.5" touch panel. It also shows the state of the furnace and all relevant data.
Complete with firing table for sintering in 1 level up to Ø 100 mm, PTCR kit,
tweezers
optional: temperature upgrade to 1.560°C, software-package,
sintering in 2 levels
Aluminum frame, silver anodize